Material: Carbon Steel or Stainless Steel A2 A4
Stamping parts are by presses and molds on the plate, strip, pipe and profile, etc. exert external forces to produce plastic deformation or separation, so as to obtain the required shape and size of the workpiece (stamping parts) of the forming process method. Stamping and forging are plastic processing (or pressure processing), collectively, forging. The stamping blanks are mainly hot-rolled and cold-rolled steel plates and strips.
Steel in the world, there are 60~70% is the plate, most of which are washed and pressed into finished products. Car body, chassis, fuel tank, radiator chip, boiler drum, container shell, motor, electrical iron core silicon steel sheet, etc. are stamping processing. Instruments, household appliances, bicycles, office machinery, life utensils and other products, there are a large number of stamping parts.
Stamping parts are mainly metal or non-metallic sheet, with the pressure of press, through stamping die stamping process, it mainly has the following characteristics:
⑴ stamping parts are not in the material consumption of the premise, after stamping manufactured, the parts of light weight, stiffness, and the sheet after plastic deformation, the internal structure of the metal improved, so that the strength of stamping parts improved.
⑵ stamping parts have higher dimensional accuracy, uniform size of the same die, and have good interchangeability. No further machining is required to meet General Assembly and use requirements.
⑶ stamping parts In the stamping process, because the surface of the material is not damaged, it has a better surface quality, smooth appearance, which for surface painting, electroplating, phosphating and other surface treatment provides a convenient condition.
|Material:||Carbon Steel or Stainless Steel|
|Package:||Bulk or Small box|
Copyright © Dyshine Industry Co.,Ltd All Rights Reserved.