logo

Product

Contact Us

DIN6899A Thimble

DIN6899A Thimble

Material: Carbon Steel or Stainless Steel A2 A4

Product Details

Quality requirements:

1, thimble should be smooth and flat, no damage to the wire rope cracks, flaws, sharp edges and uneven surface roughness. The tip of the heart ring should be free to fit and cut the tip to half as deep as the groove.

2, thimble surface should be hot-dip galvanized, and the surface should be smooth, no leakage plating, zinc particles, bubbles, cracks and other defects, galvanized layer in the normal application, should have sufficient adhesion strength.

3, thimble material can choose A3 steel or 15, 35 high-quality carbon steel.

4. The safety load of thimble should not be less than 32% of the minimum breaking tensile force of the wire rope.

5, the use of thimble should be selected with the Wire Rope specifications (Schedule 5), the use of the shaft pin diameter should not be less than twice times the diameter of the wire rope.


We Can Produce:
Material:Carbon Steel or Stainless Steel
Surface:ZP
Package:Bulk or Small box

Related Products

Inquiry

Products
BOLT
NUT
WASHER
SCREW
Exhibition
Bolt support
Advantages of bolt support
The characteristics and...
Rivet cleaning
Latest News
What Are The...
How Does The...
What Is The...
Why Hexagon Nuts...
Contact information

Room 17A,BLS Building,Haining Road 338# Zhejiang Haining

Tel: +86-573-80705030

allen@dyfastener.net

Copyright © Dyshine Industry Co.,Ltd All Rights Reserved.