Dyshine Industry Co.,Ltd

Exhibition

Contact Us

Sheet Metal Screws Introduction

Mar 21, 2018

Fastening the sheet metal is a process that usually requires technical expertise to do the right thing. Unfortunately, not many people understand this. So there are many cases where individuals spend a lot of money doing such a fastening just because it is not very good. The key to avoiding this is to make sure you understand the different types of fasteners that you can use for your work. Remember that using the wrong fastener will only cause joint damage in a short period of time. There are several types of fasteners available for this application.


Some of these elements include:


Pan head Screws These types of screws usually look like rivets. They designed the way they had a prominent head. They usually also have a slotted or Phillips head. These types of fasteners usually have zinc or other types of electroplating. When selecting this type of fastener, always make sure that it is made from materials that have properties that are appropriate for the application you want to use. For example, if a sheet metal is subjected to high tensile strength, you need to use material that can withstand this force.


For example, you will find that titanium is much better than aluminum in this application.


Oval head Screws These sheet metal screws look like common flat head screws, such as stainless steel hexagon cap screws. However, they usually have more belts. This plays a role in making the screws have a more complete appearance when in place. With other types of screws, you can also order them with Phillips or open slotted.


These types of screws are ideal for situations where you need aesthetic results and fastening is very good.


Flat head Screws, as the name suggests, have a flat upper surface. They can have slots or Phillips-heads. These are the best types of sheet metal screws that need to be used when the fastener is buried. For example, a sheet metal piece is part of a moving part. In this case, the use of countersunk fasteners will help reduce friction between moving parts. These types of screws can be designed in a variety of ways.


Therefore, before ordering, you need to be very clear about what you need.


Self-drilling Screws are designed to have a sharp tip, which means you can put them in place without first drilling a pilot hole in the material. This makes them different from other types of fasteners, such as aluminum cap screws.


To make them more effective, you may need to put them in a material that is difficult to use as a drill and fastener. The selection of fastening fasteners for metal sheets is essential to obtain quality results. These are some of the best types you can get.


Related Industry Knowledge
Products
BOLT
NUT
WASHER
SCREW
Exhibition
Bolt support
Advantages of bolt support
The characteristics and...
Rivet cleaning
Latest News
What Are The...
How Does The...
What Is The...
Why Hexagon Nuts...
Contact information

Room 17A,BLS Building,Haining Road 338# Zhejiang Haining

Tel: +86-573-80705030

allen@dyfastener.net

Copyright © Dyshine Industry Co.,Ltd All Rights Reserved.