logo

Exhibition

Contact Us

Key points to consider when installing seats in your van

Mar 21, 2018

If you happen to own a van, one of the challenges you may face is how to make sure it's customized and it will become practical and useful. An example is when you want to accommodate more seats, or change the seating configuration in the van. This may be necessary for a number of reasons, including when you want to use it for special purposes such as travel. In addition, you can use it to meet local regulations in your city.


Either way, you need to make sure that the seat in the van is carefully completed.


Is there a problem with having a seat in your car? One of the challenges you may face when you are not in the right seat is security damage. When the seats are not properly fastened in place, they may move too much. This means that, in case of emergency parking, some passengers will be thrown in the car even with seat belts. In addition, you will find that this damages the integrity of the truck's structure.


Moving too many seats can damage the van's floors, which means you may need to repair them as soon as possible.


What important things do you need to be aware of when your seat is right?


If you are installing a minibus seat, some of the important issues you need to consider include: Make sure you use the correct fasteners: always ensure that the fasteners used are correct.

Obtained products such as nickel socket cap screws and nitronic 50 sets of screws will increase the likelihood that the seat stays in place long. Make sure the torque is set correctly: when you tighten the seat, make sure you use the appropriate torque volume of the fastener. This will depend on the type of fastener you purchased.

This also means that it will be sensible for you to use a zipper that can provide torque readings. Use the specified fastening slot: Most vans will have a specified slot through which the fastener can be placed. Most of the time, these are enhanced contact points, usually in the van chassis.

Creating additional holes that can be inserted into the fastener will only increase the risk of the fastener because it will not be safe. Always use corrosion-resistant products: when purchasing fasteners, always get those corrosion-resistant.

These tend to last for a long time, especially since the floor of the car may be exposed to a lot of moisture. If you don't know how to properly install the seat in the van, you can always consult the car inside the refit shop. The emphasis is on avoiding risks in fastening.


Related Industry Knowledge
Products
BOLT
NUT
WASHER
SCREW
Exhibition
Bolt support
Advantages of bolt support
The characteristics and...
Rivet cleaning
Latest News
What Are The...
How Does The...
What Is The...
Why Hexagon Nuts...
Contact information

Room 17A,BLS Building,Haining Road 338# Zhejiang Haining

Tel: +86-573-80705030

allen@dyfastener.net

Copyright © Dyshine Industry Co.,Ltd All Rights Reserved.